Ukufakwa kwe-Belt Contwor iqhutywa ngokubanzi kwezi zinto zilandelayo.
1. Faka isakhelo sesakhelo sebhanti yokufakelwa kwesisakhe sesakhelo esivela kwisakhelo sentloko, emva koko ufake izakhelo eziphakathi kwicandelo ngalinye ngokulandelelana, kwaye ekugqibeleni ufake isakhelo somsila. Ngaphambi kokufaka isakhelo, i-intanethi kufuneka itsalwe ecaleni kobude bonke bomhambi. Kuba ukugcina iziko lomda kwilayini ethe tye yimeko ebalulekileyo yokusebenza kwesiqhelo kwibhanti yesiqhelo, xa sifaka icandelo lesakhelo, kwaye kwangaxeshanye siyele ishelufa. Impazamo evumelekileyo yesakhelo kumgca weziko ± 0.1% ngemitha yobude boomatshini. Nangona kunjalo, impazamo yeziko lefreyimu ngaphezulu kobude bonke bomnxibelelanisi akufuneki idlule kwi-35mm. Emva kokuba onke amacandelo athile afakiwe kwaye angqinelane, icandelo ngalinye lingaxhunyiwe.
2. Faka isixhobo sokuqhuba xa ufaka isixhobo esiqhuba, ukhathalelo kufuneka kuthathwe ukwenza i-shaft yedreyini ye-Belt, kunye ne-axis ye-Axis ehambelana ne-axis driclel. Kwangelo xesha, zonke iishafu kunye neengcango kufuneka zikhutshiwe. Impazamo ethe tye ye-Axis, ngokobubanzi bomsasazi, kuvunyelwe ngaphakathi kwe-0.5-1.5mm. Ngelixa ufaka isixhobo esiqhubayo, izixhobo zokunyangazwa ezifana neevili zevili zinokufakwa. I-axis ye-pulley yesixhobo sempikiswano kufuneka ibe yi-perpendicular ukuya kumgca we-benti ye-Belt Contrey.
3. Install idler rollers After the frame, transmission device and tensioning device are installed, the upper and lower idler roller racks can be installed so that the conveyor belt has a curved arc that changes direction slowly, and the distance between the roller racks in the bending section is normal. I-1/2 ukuya kwi-1/3 yomgama phakathi kwezakhelo zeroller. Emva kokuba i-IDler Roller ifakiwe, kufuneka ijikeleze ngokungaguqukiyo kunye ne-brisks.

4. Ulungelelwaniso lokugqibela lwebhanti yebhanti ukuze kuqinisekiswe ukuba ibhanti ye-collor ihlala ihamba kwi-rollers kunye neepuli, ezi mfuno zilandelayo kufuneka zifezekiswe xa kufakwa iirawuthi, iiracks kunye neepulles:
1) Zonke ii-idler kufuneka zilungiswe kwimiqolo, ngokuhambelana, kwaye igcinwe ethe tyaba.
2) Zonke iirollers zidityaniswe ngokuhambelana.
3) Ulwakhiwo oluxhasayo kufuneka luchaneke ngqo kwaye luthe tye. Ngesi sizathu, emva kokuba kufumaneka i-drive roller kunye nefreyimu ye-IDler ifakiwe, i-intanethi kunye nenqanaba lomhambisi kufuneka lihambelane.
5. Emva koko lungisa irakhi kwisiseko okanye kumgangatho. Emva kokuba i-Belt Contwor ilungisiwe, ukondla kunye nokulayisha izixhobo kungafakwa.
6. Ukuxhoma ibhanti yeDisvey I-0.5-1.5t yesandla se-Widch ingasetyenziselwa ukuxhoma imitya. Xa iqinisa ibhanti yokunxibelelana, i-roller yesixhobo soxinzelelo kufuneka sifudukele kwindawo yokubeka umda, kwaye itrolithi kunye nesixhobo sempikiswano esijikelezayo kufuneka sitsalwe kwicala lesixhobo sokuhambisa; Ngelixa isixhobo sempikiswano esithe nkqo kufuneka sihambise i-roller ukuya phezulu. Ngaphambi kokuqinisa ibhanti yeDilesi, uMgangatho kunye nemoto kufuneka ifakwe, kwaye isixhobo esibrashi kufuneka sifakwe kwi-on of honer.
7. Emva kokuba kufakwe i-Benti Conser, i-ID yokuqhuba iyafuneka. Kumatshini wokuvavanya okuqinisekileyo, ingqalelo kufuneka ihlawulwe ukuba kukho xa kukho ukusebenza kwebhanti le-conloor belt, umsebenzi we-idler ngexesha lokusebenza, kwaye umatshini wovavanyo unokwenziwa kuphela emva kokuba zonke izinto ziqhelekile. Ukuba isixhobo sempikiswano ye-spiral isetyenziswa, ukuqina kufuneka kulungiswe kwakhona xa umatshini wovavanyo usebenza phantsi komthwalo.